A common faults: installation CD writer unable to start the computer
First cut off the computer power supply,sony udqf2ph22cf0 laptop cpu fan open the case shell check IDE line is insert completely, and to ensure the PIN - 1 PIN position properly connected. If the CD writer and other IDE equipment Shared a IDE line, should guarantee the two equipment cannot at the same time setting of "MA" (Master) or "SL" (Slave) way, can put a set to "MA", a set to "SL".
Common fault 2: use simulation burn success, actual burn failed
CD writer provide "simulation burn" and "burn" the order difference lies in whether hit laser beam, and other operations are exactly the same, that is to say, "simulation burn" can test source CD is normal, hard disk rotational speed is fast enough, enough free disk space and environment situation of the burn, but can't test to burn blanks whether existence problem and CD writer laser read-write head power and disc is matching, etc. In view of this, explain "simulation burn" success, and really burn failure sony udqf2ph52cf0 laptop cpu fan that CD writer and blank disc of compatibility between is not very good, can use the two kinds of ways to test the:
1. Reduce CD writer's writing speed, it is recommended that the following 2 x;
2. Please change another brand of blank discs burn operation. This kind of phenomenon appeared another reason is that laser read-write head power asus a6000ga laptop cpu cooling fan attenuation phenomena cause, if use the same brand of disc burning, in a period of time before all normal, and is likely to read/write head power attenuation related, can send relevant manufacturer maintenance.
Common fault three: can't copy the game CD
A few large commercial software or game software, in the production process, the CD blanks made protection, so in the replication process, will be unable to replicate, leading to burn process error occurs, or copy the later can't be used normally takes place.
Common fault 4: burn CD music cannot normally broadcast
Not all audio equipment can normal reading cd-r blanks, most of the CD machine can read normal cd-rw makes blanks content, so best don't use DVD burner to burn a CD music. Additional, still need to pay attention to is that burn CD music, must want to accord with CD - DA file format.
Common fault 5: the ones in the process of CD, can appear sometimes "BufferUnderrun" error message information
"BufferUnderrun" error message information means buffer underload. General in the burning process, to burn data need by the hard disk
A IDE interface transfer to the host, and then via the IDE interface transfer to CD writer of the cache (BufferMemory), and the last CD writer put in toshiba qosmio x300 series laptop cpu cooling fan storage
In the BufferMemory data information copied to the cd-r or cd-rw makes blanks, these actions must be continuous, absolutely can't interrupt, if any a link to a problem, can create CD writer cannot normal write data, and the emergence of buffer underloaded error message, which is disc scrap. The solution is, in burning need to be closed before some permanent memory program, such as closed CD automatic insertion notice, closed anti-virus software, Window task management and planning task procedures and screen saver, etc.
Common fault 6: cd-writing process, often can appear burn failure
Improve the success rate of burn need to keep system environment pure, namely close background resident program, best for burning system to prepare a special of the hard drive, special installation and burn relevant software. In the burning process, had better put the data stored in the first hard disk, made "ISO image files", and then burnt into CD. In order to guarantee burn process data transfer is fluent, need often to toshiba qosmio x305 series laptop cpu cooling fan hard disk fragments to arrange, avoid for file cannot be normal transmitted, burn caused by interruption error, can by implementing "disk scan program" and "a defragment program" to carry out the hard disk finishing. In addition, in the burning process, don't run the other programs, even the mouse and keyboard also do not go to easily to touch. Burn use computer had better not and other computer networking, and in the burning process, if the system administrator to the machine to send information, it will affect burn effect, in addition, in the local area network, do not use resources sharing, if in the burning process, other users read local hard disk, can cause burning work interrupt or failure. In addition, but also pay attention to the CD writer of the heat dissipation problems, good heat dissipation conditions will give CD writer a stable working environment, if because continuous burn, CD writer calorific value is exorbitant, can turn off the computer, such as lower temperature after continue to burn. For built-in CD writer best inside the case in add extra cooling fan. External burn confidential note dust, moistureproof, lest cause laser head, speaking, reading and writing is not normal.
Common fault 7: use EasyCDPro burn can't identify Chinese directory name
In the use of EasyCDPro burn Chinese filenames when,toshiba qosmio x505 series laptop cpu cooling fan can select the options in the file name Romeo, can support up to 128 a filename, namely 64 Chinese characters of the file name. In addition, WinonCD, Nero, DirectCD2. X and so on all can well support long Chinese filename, EasyCDCreator in this aspect to slightly some trouble.
http://batterychargertips.typepad.com/blog/2012/08/the-computer-daily-maintenance.html
http://camera-battery.blog.so-net.ne.jp/2012-09-01
No comments:
Post a Comment